Resin Mixer 360L | Resin Bonding & Mortar Mixer | Imer MIX 360 400V
- 2 versions: Three-phase 400V/50Hz electric motor – Honda GXV340 petrol engine 8.1 kW
- Electric safety limit switch
- Thermal-magnetic switch with IP 55 no-volt coil and IP 67 plug (version with electric motor)
- Grid with bag-splitting blades: provides good visibility and protects against accidental contact
- Pneumatic wheels for excellent on-site mobility
From £5,399.10 Excl. VAT
One of the largest resin bound gravel pan mixers in the industry. Perfect for resin bonding and resin driveways. Large batch resin.
The Imer Mix 360 is a forced action mixer that can be towed on site, or on the road, and is available in 3 phase or in petrol. It can mix both dry or wet fine grain materials, such as plaster, mortar, cement, and much more. The machine’s mixing paddles have a slick geometry thus creating a fast and homogeneous batching for materials and fast discharge. The mixers discharge goes through the bottom, and has a protection guard for the operators protection. Within the mixers paddles, there is a rubber insert that reduces the wear of the machine, and makes for an easier cleaning process. The forced action mixer consists of a safety device that stops the machine if the top of it has been lifted when the operation of the mixer is still running. The top guard also has a bag splitter.
The mixing capacity for this machine per cycle is 200 litres, which is in approximation, half of the tanks height. The switch has a NVC that means it has stopped by the top safety device. This means it will not automatically start back up when the top is replaced.
|Paddle speed – electric motor/petrol engine||rpm||36/36|
|Motor power: electric motor/petrol engine||kW||3/8.1|
|Electric motor running current||A||7.2|
|SPL in operator’s position: electric motor/petrol engine||dB(A)||70/88|
|Discharge height: max. – min.||mm||745-445|
|Machine weight: electric motor/petrol engine||kg||357/360|