Forced Action Mixers

The UK’s largest trade and hire supplier of resin drive material mixers. Call for unbeatable prices on IMER forced action mixers for resin bound installations.

Resin Drive suppliers must use a Forced Action Mixer for Resin Bound installation. Other cement mixers are not suitable.

mix 120 plus

Perfect portable mixer for resin, concrete & screed

The Mix 120+ is a vertical shaft concrete mixer intended for heavy-duty construction applications.

The Mix 120+ is designed to mix a large range of wet and dry materials including mortar, plaster, cement, thin-set, adhesives, resins, coatings, paints, insulation, vibration-damping materials, and more.

This cement mixer is highly mobile and can easily be rolled through standard doorways. The mixing action of the Mix 120+ is neat and controlled, allowing the user to mix indoors without making a mess.

The Mix 120+ features a convenient reverse switch that changes the mixing direction to ensure proper mixing of any material.

Product No. 1194301

Technical Specifications
    MIX 120 PLUS
Drum capacity l 120
Mixing performance l 90
Drum diameter mm 745
Max grain size mm 8
Paddle speed rpm 38
Electric motor power rate 230V/50Hz kW 1.4
Running current A 15
SPL in operator’s position dB(A) 70
Machine weight (packing) kg 130 (139)
Dimensions w/l/h (packing) mm 745/842/1277 (770/880/955)

 

Standard Equipment
• Skim cote
• Waterproofing products
• Cement-based plasters
• Plaster-based plasters
• Lime-based plasters
• Grouts
• Dry-pack
• Cement with aggregates up to 8 mm
• Self-leveling underlayments
• Masonry mortar
• Fiber-reinforced cement
• Fireproofing materials

mix 360

Mini Batch Plant production for the cost of a mortar mixer

Achieve an output of up to 9 cu.ft. of mud every three to four minutes. Perfect for the busy job site.

The discharge system is now easier to open and close and better protected from being hit by the mud bucket or forklift. The safety grate has been improved, it is now hinged, access for clean up is immediate and complete. 

Product No. 1194591

Technical Specifications
    MIX 360
Drum capacity l 360
Mixing performance l 200
Drum diameter mm 952
Paddle speed – electric motor/petrol engine rpm 36/36
Motor power: electric motor/petrol engine kW 3/8.1
Electric motor running current A 7.2
SPL in operator’s position: electric motor/petrol engine dB(A) 70/88
Discharge height: max. – min. mm 745-445
Machine weight: electric motor/petrol engine kg 357/360
Dimensions w/l/h mm 1080/1680/1155
Standard Equipment
  • 2 versions: Three-phase 400V/50Hz electric motor – Honda GXV340 petrol engine 8.1 kW
  • Electric safety limit switch
  • Thermal-magnetic switch with IP 55 no-volt coil and IP 67 plug (version with electric motor)
  • Grid with bag-splitting blades: provides good visibility and protects against accidental contact
  • Pneumatic wheels for excellent on-site mobility

mix 750

Designed to mix without halting your project

The science behind vertical shaft mixers is quite simple. The paddles are in the mix 100% of the time. The material is blended with a stirring action as opposed to a flipping action which high speed film shows is a more aggressive and thorough mixing action.

Our mixers do not trap aggregate down at the bottom of the mixer which jam up the paddles in conventional mortar mixers. Vertical shaft mixers are great to handle dry pack, grouts, thin sets, stuccos, self-leveling materials and oh yeah, mortar.

Product No. 1194637

Technical Specifications
    MIX 750
Drum capacity l 750
Mixing performance l 480
Drum diameter mm 1300
Paddle speed – electric motor/petrol engine rpm 35/36
Motor power: electric motor/petrol engine kW 4/8.1
Electric motor running current A 9
SPL in operator’s position: electric motor/petrol engine dB(A) 70/88
Discharge height: max. – min. mm 720-570
Machine weight: electric motor/petrol engine kg 720/720
Dimensions w/l/h mm 1730/2279/1680

 

Standard Equipment
  • 2 versions: Three-phase 400V/50Hz electric motor – Honda GXV340 petrol engine 8.1 kW
  • Electric safety limit switch
  • Thermal-magnetic switch with IP 55 no-volt coil and IP 67 plug (version with electric motor)
  • Grid with bag-splitting blades: provides good visibility and protects against accidental contact
  • Pneumatic wheels for excellent on-site mobility

An optimum answer to working requirements for both bagged pre-mixed materials and silos.

imer

THE IMER GROUP IS A LEADER IN EUROPE REGARDING THE PRODUCTION OF
CONSTRUCTION MACHINERY AND EQUIPMENT.

Within the Construction Machinery category, there are four lines, each for specific professionals in the sector. Concrete Mixers, Mortar Mixers (compact and continuous mixers), Hoists (scaffold and gantry hoists, hoisting accessories) and Saws (tile, masonry and slab saws).

Our products are applied in the most varied contexts: from small jobs to large works, from renovation to new buildings.
With an eye always on the wide range of materials used in the market.

Get 5% off your first purchase using code: FIVER

X
Cart
  • No products in the cart.